Filter
Top Products
25
Remote Programming
Search Codes
Cable/Satellite Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
2) Press the TV P
OWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press TV P
OWER, see if the CATV or Satellite box responds.
4 )If there was a response, press R
ETURN+. The operating codes are now set. If there was no response, repeat
Step 3. If you repeat Step 3 a total of 52 times without a response, use the remote control which came with the
equipment.
5) Press R
ETURN+ to exit.
VCR Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
2) Press the VCR P
OWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press VCR P
OWER, see if the VCR responds.
4) If there was a response, press R
ETURN+. The operating codes are now set. If there was no response, repeat
Step 3. If you repeat Step 3 a total of 80 times without a response, use the manufacturers remote control which
came with the VCR.
5) Press R
ETURN+ to exit.
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
2) Press the DVD P
OWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press DVD P
OWER, see if the DVD player responds.
4) If there was a response, press R
ETURN+. The operating codes are now set. If there was no response, repeat
Step 3. If you repeat Step 3 a total of 30 times without a response, use the manufacturers remote control which
came with the DVD player.
5) Press R
ETURN+ to exit.