JVC AV 61S902 Projection Television User Manual


 
55
Button Functions
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions include: play, record,
rewind, fast-forward, stop, pause, channel scan, TV /VCR, power on, and power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR,
please see the code chart and instructions on page 23.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These functions include:
play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand
DVD player, please see the code chart and instructions on page 24.
TV/CATV Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the televi-
sion’s built-in tuner. Move the switch to CATV to operate a cable box.
• See page 22 for information on programming your remote for cable box operation.
VCR/DVD Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control. Use the VCR/DVD
selector switch to choose either VCR or DVD operation.
• See pages 23 and 24 for information on programming your remote with VCR and DVD operating codes.