JVC AV 61S902 Projection Television User Manual


 
30
Plug In Menu
The AV-61S902 is equipped with its own internal clock. The clock is used to run the televisions timer features.
The clock MUST be set before you can use any of the timer features. Your television features the XDS AUTO
CLOCK set feature which makes setting the correct time simple.
To set the clock, use the
5∞
arrows to move to SET CLOCK on the PLUG IN MENU. Select the option by
pressing
2
or
3
.
The SET CLOCK menu will now appear. If you have a Public Television System station broadcasting in your
local area you can select the AUTO option (PBS stations carry the XDS time signal). The television will auto-
matically collect the time information. The only information you will need to provide is what time zone you are
located in and if Daylight Savings Time is currently in effect.
Once the AUTO mode has been selected, use the
arrow to move to TIME ZONE. Select the time zone
using the
2
or
3
arrows. Once your time zone is set, use the
arrow to move to D.S.T. Select D.S.T., by
pressing
2
or
3
. Choose ON or OFF with the
2
or
3
arrows. To finish, use the
arrow to select ON or OFF.
Now use the
arrow to move to FINISH. Finish by pressing
2
or
3
.
If you do not have a PBS station in your local area, or if the AUTO option does not give you the correct time
for your area, you will have to set the time manually. Select the MANUAL option. To set the clock manually,
use the
arrow to move to the Time. Use the
2
or
3
arrows to set the hours. Press the
arrow to move
to minutes. Set the minutes with the
2
or
3
arrows. When the correct time is set, use the
arrow to move to
START CLOCK. Press
2
or
3
to start the clock and exit.
• Special Note for residents of Newfoundland in Canada. The Newfoundland time zone is not included in
the time zones listed in AUTO CLOCK SETUP. If you live in the Newfoundland time zone, you must set your
clock using the manual clock set option.
SET CLOCK
Once you have completed setting the options in the PLUG IN MENU, choose FINISH to leave the menu and
begin watching your television. Use the
5∞
arrows to move to FINISH at the bottom of the PLUG IN MENU.
Select FINISH by pressing
2
or
3
.
Your PLUG IN MENU settings are now complete. You may now begin watching your television. If you wish to
further customize your television to your viewing preferences, please continue reading.
FINISH
SET CLOCK
TIME ZONE
D.S.T.
MODE AUTO
ATLANTIC
ON
OPERATE BY
EXIT BYSELECT BY
EXIT
FINISH
SET CLOCK (AUTO)
Note:
You can change your PLUG IN MENU settings at any time. You can access LANGUAGE, AUTO TUNER SETUP and
SET CLOCK from the onscreen menu system.
SET CLOCK
MODE
TIME
MANUAL
:
OPERATE BY
EXIT BYSELECT BY
EXIT
START CLOCK
SET CLOCK (MANUAL)