Filter
Top Products
53
Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7:
0 (Zero)
7 (Seven)
Use the 100+ button to directly access channels above Channel 99. For example, to move to channel 124:
100+
2 (Two)
4 (Four)
Number Buttons - 10 Key Pad
100+ Button
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels. To program:
R
ETURN+ and hold for three seconds.
You can now scan through the channels using the C
H+/- buttons.
R
ETURN+
You will return to your programmed channel.
• To cancel your R
ETURN+ channel, press and hold the RETURN+ button for three seconds. The message
“RETURN CHANNEL CANCELLED!” will appear.
• R
ETURN+ works only with CHANNEL+/-. Pressing any number key will cancel RETURN+.
Return+
By pressing the remote control V-CHIP button, the V-chip rating information for the program which is being
received is displayed on the screen.
If the V-chip rating information is not being sent, “UNRATED” is displayed on the screen.
If the zero (“0”) button is pressed while the V-chip rating is displayed on the screen, all categories with the
same or a higher V-chip rating will be blocked.
For example, if you block movies rated NC-17, movies rated X will also be blocked.
• V-chip blocks can be manually set one at a time by using the V-chip option in the INITIAL SETUP menu.
For detailed information about V-chip ratings and V-chip manual settings, refer to pages 33 to 35.
V-chip
Button Functions
RETURN CHANNEL
PROGRAMMED !