Filter
Top Products
12 EN
INITIAL SETTINGS (cont.)
SET TIME
5
Press CH 5∞ or TIME
SCAN %fi until the desired
time appears, then press
OK or TIME SCAN .
● Press and hold CH 5∞
or TIME SCAN %fi to
change the time by 30-
minute increments.
● When the time is entered manually, "AUTO CLOCK"
will be automatically set to "OFF", and "HOST CH"
and "TIME ZONE" will disappear.
SET DATE
6
Press CH 5∞ or TIME SCAN %fi until the desired date
appears, then press OK or TIME SCAN .
● Press and hold CH 5∞ or TIME SCAN %fi to change
the date by 15-day increments.
SET YEAR
7
Press CH 5∞ or TIME SCAN %fi until the desired year
appears, then press OK or TIME SCAN twice.
SELECT D.S.T. MODE
8
Press CH 5∞ or TIME SCAN %fi to select the desired
mode.
a– Set to "ON" so that the adjustment to your VCR's
clock will be made on the clock itself.
b– Set to "OFF" if Daylight Saving Time does not apply
to you.
START CLOCK
9
Press MENU and normal screen appears.
Manual
%
%
To Make Corrections
Press OK or TIME SCAN until the item you want to change
blinks, then press CH 5∞ or TIME SCAN %fi.
%
SELECT TIME ZONE
8
You can select the time zone automatically or manually.
Move the highlight bar to "TIME ZONE" by pressing OK
or TIME SCAN , then press CH 5∞ or TIME SCAN %fi
to select "AUTO" or the desired time zone.
AUTO ATLANTIC
HAWAII EASTERN
ALASKA CENTRAL
PACIFIC MOUNTAIN
NOTE:
If an incorrect time is displayed by the Plug & Play
function, you may be receiving the clock setting data of
a PBS channel from an adjacent time zone or from an
incorrect PBS channel from a cable TV system. If you
selected "AUTO" for the host channel in step 6, be sure
to select the correct time zone manually.
RETURN TO NORMAL
SCREEN
9
Press MENU.
IMPORTANT
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel
when the clock is being set. The current time will appear
automatically when the clock is set.
%
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 99
AUTO CLOCK: ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
%