Filter
Top Products
34 EN
PLAYBACK AND RECORDING FEATURES (cont.)
Digital TBC/NR
Your VCR is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this VCR as the player for editing.
SELECT DIGITAL TBC/NR
SET MODE
1
Press DIGITAL TBC/NR so that the button lights up.
● Pressing the button again turns off this function.
NOTES:
●
If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with Digital TBC/NR set to off.
●
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
●
Digital TBC/NR and Video Stabilizer (
੬
pg. 29) cannot be
used at the same time; if you turn on Digital TBC/NR when
"VIDEO STABILIZER" is set to "ON", Video Stabilizer will be
automatically turned "OFF". Make sure Digital TBC/NR is off
when you want to use Video Stabilizer.
Digital R
3
Digital R
3
picture system applies edge correction to the luminance
signal to enhance detail.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH5∞ or
TIME SCAN %fi, then
press OK or TIME SCAN
#
.
SELECT DIGITAL R3 SET
MODE
3
Move the highlight bar
(arrow) to "DIGITAL R3" by
pressing CH 5∞ or TIME
SCAN %fi, then press OK
or TIME SCAN
#
to set to
"ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
=FUNCTION SET
TUNER SET
INITIAL SET
HI-FI REC LEVEL CTL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
NOTES:
●
Normally it is recommendable to keep "DIGITAL R3" set to
"ON".
●
Depending on the type of tape being used, picture quality
may be better with "DIGITAL R3" set to "OFF".
●
If you use this VCR as the player for editing, be sure to set
"DIGITAL R3" to "OFF" before starting.
FUNCTION
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
=DIGITAL R3 ON
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
1
3
JOG
SHATTLE
+
−
OK
MENU
MENU
OK
TIME SCAN
CH
DIGITAL TBC/NR