Filter
Top Products
32 EN
PLAYBACK AND RECORDING FEATURES (cont.)
JOG
SHATTLE
+
−
SELECT CA PLAYBACK SET MODE
4
Move the highlight bar
(arrow) to "CA PLAYBACK"
by pressing CH 5∞ or
TIME SCAN %fi, then
press OK or TIME SCAN
#
to set to "AUTO".
● Select "AUTO" to
automatically skip over
CA recorded commercials during playback.
● Select "MANUAL" to manually skip over CA recorded
commercials by pressing SKIP SEARCH.
● Select "OFF" to disable CA Playback of CA recorded
commercials.
● Press SKIP SEARCH during playback, with "MANUAL"
(or "AUTO") selected, to fast-motion the tape to the
end of the next commercial group or to the end of the
recording, and then resume normal playback.
NOTE:
If you press
SKIP SEARCH
during a commercial, the
VCR may not resume normal playback at the end of the
group of commercial. If this occurs press
PLAY
or
STOP
to resume normal playback.
RETURN TO NORMAL SCREEN
5
Press MENU.
U.S. Pat. No. 5,333,091
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS FUNCTION SET SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH 5∞ or TIME SCAN %fi, then press OK or
TIME SCAN
#
.
SELECT CA RECORD SET MODE
3
Move the highlight bar
(arrow) to "CA RECORD"
by pressing CH 5∞ or
TIME SCAN %fi, then
press OK or TIME SCAN
#
to set to "ON".
"CA(Commercial Advance) RECORD" and "CA PLAYBACK" are
set to " OFF " at the factory. To set Commercial Advance
perform the following steps to set "CA RECORD" to "ON" and
"CA PLAYBACK" to "AUTO".
0
4
1
3
MENU
OK
NOTES:
●
If you set "CA RECORD" to "ON" while recording is in
progress, the VCR will mark an index code at that location.
●
You cannot change the "CA PLAYBACK" setting during
Commercial Advance fast-motion playback.
●
While recording is in progress with "CA RECORD" set to
"ON", you cannot mark an index code manually, nor change
the recording tape speed.
●
During playback with "CA PLAYBACK" set to "OFF", pressing
SKIP SEARCH
starts fast-motion playback for 30 seconds on
the counter (
੬
pg. 26).
●
If there is a power outage while recording is in progress
with "CA RECORD" set to "ON", commercials that are
recorded after the power is restored may not be detected
properly.
●
If you want to stop recording when "CA RECORD" is set to
"ON", be sure to press
STOP
. If you press
POWER
or
TIMER
to stop recording, that may affect detection accuracy for
commercials recorded afterwards.
PREVIOUS PAGE
FRONT AUX INPUT VIDEO
REAR AUX INPUT VIDEO
=CA RECORD ON
CA PLAYBACK OFF
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
FRONT AUX INPUT VIDEO
REAR AUX INPUT VIDEO
CA RECORD ON
=CA PLAYBACK AUTO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
MENU
OK
TIME SCAN
SKIP SEARCH
CH
FUNCTION
=VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
DIGITAL R3 ON
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END