JVC TV 13140 TV VCR Combo User Manual


 
LOADING AND UNLOADING A VIDEO CASSETTE PLAYBACK
Use only video cassette tapes marked _ and S_.
LOADING
Push the center of the tape untilit is automatically retractsd intothe TVNCR.
AUTOMA'RC POWER ON AND PLAY
When loading a cassette tape withoutthe erase prevention tab intact, the TV/VCR willturn on automatically
and p_aybackwillstart immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
UNLOADING
_1 ounload a video cassette, press the STOP/ mr..iD!
EJECT button on the TVNCR twice. The first
presswill stopthe tape in anymode. "me second
presswiJIejectthe tape.
S_Op/EJECt"
AUTOMATIC EJECT
If the TVNCR automatically rewinds thetapetothe
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically. (See NOTE on page 34.)
TO PREVENT ACCIDENTAL ERASURE
rafter recording, break off the erase preventiontab if
you do notwish to recordover the tape.
Pull the cassette out.
NOTE: Always eject the tape when not in use.
The cassette tape can be ejected even ifthe
POWER is"OFF".
TO RECORD AGAIN
Cover tbe hole with vinyl tape.
Be carefulthe tape does notextend past the edges of
the videocassette housing.
TAPE SPEED AND MAXIMUM RECORDING TIME
_r VIDEO CASE3"FE TAPE
%160 T-120 T-90 T-60 T-30
SP (Standard Play) 2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
LEP (Extended Play) 8 hours 6 hours 4-1/2 hours 3 houm 1-1/2 hours
28
To playaprerecordedtape.
TO START PLAYBACK
TotornontheTVNCR, pressthe POWERbutton,
Load a prerecorded tape. (When loading acassette tape without the erase prevention tat
playback willstart automaticaity.)
Press the PLAYbuifonthbeg_ playt_d_
=I_"wiUabpear _ _,_eso'cert.
TO STOP PLAYBACK
press the STOP buttononce. The ta
remain fully loaded and ready toplay.
%
NOTE: This TV/VCR selects the tape speed SP or EP automatically.
29