Filter
Top Products
DUPLICATING A VIDEO TAPE RECEPTION DISTURBANCES
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Mako all conneoflons before turning on the power.
_i_ Insertablankcassettewiththeerasepreven- _ PresstheINPUTbuttontwiceselectAUDIO/
tiontab intactinto the TVNCR. VIDEO input position,The "LINE P' will appear
Insert a previously recorded cassette intothe on the screen.
playback VCR orCamcorder.
CONNECTION TO ANOTHER VCR
RECORDING _/NCR
I_PLAYBACKAuDtOouTVCR _
VIDEO
OUT| VIOE , I_ AUOIO IN
I i
AUDIO/VIDEO CORD (NOT SUPPUED)
INPUT
NOTE: You can also use the rear AUDIONIDEO IN
Jacks. Select "UNE R"by pressing the INPUT
button.
#
CONNECTION TO CAMCORDER
ForduplicaUnga previouslyrecordedtape from8 camcorder.
follow the carncordermanufacturer'sinstructions. Atypical
camcorder dubbing hookup is shownbak)w.
RECORDING W/VCR
pLAyBACK
CAMCOROER
_To AV JaCl_
AUDI_3/tD EO CORD
Press theREC buttonand th
PLAY button simultaneousl
on the remote control or the
REC button on the TV/VCR, then
the PAUSE button.
_r_ Press the PLAY Buttonon tba
playback VCR.
%
_OE_AU_OIN
_1 Press the PAUSE button _on the TVNCR to begin
the duplicatingprocess.
NOTE: • Itis recommended that the tape speed be set to the SP mode on the TVNCR for best results.
• Unauthorized recording ofcopyrighted television programs, films, video cassettes and other materials may
infringethe rights ofcopydght owners and be contrary to copyright laws.
Most types of television Interference can he remedied by adjusfing the height end poaltion of the VHF/UHF
antenna. Outdoor antennas are recommended for best resulth. The most common types of talevlalon interfer-
ence are shown helow. If one of these symptoms appear when the WNCR is connectad to a Cabta TV sy_em,
the disturbance may he caused by the local Cable W company broadcast.
IGNITION
BEackspots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused byintedemnce from automobile ignitionsystems,
neon lamps orAC powered toolsand appliances such as drillsor hair
dryers.
GHOSTS
Ghosts are caused by the television signal followingtwo paths. One isthe
direct path and the other is reflected bytall buildings, hillsor other large
objects. Changing the direction or positionof the antenr_ may improve the
r(_cepfion.
SNOW
If the T'V/VCR is located far from the TV station, in a fringe reception
area where the signalisweak, small dots may appear in the picture.
If the signal is extremely weak, the installation ofa larger external
antenna may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused bytwo-way radios, this type of interference produces moving
ripples or diagonal streaks inthe picture.Some cases may cause a loss of
contrest in the picture. Changing thedirection and positionof the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picturesize variationisnormal when you adjustthe CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire orshock hazard, disconnect the TVNCR from the AC power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft,damp cloth and cared for as ether furniture. Use
caution when cleaning or wipingthe plastic parts.
42 43