Filter
Top Products
LOCATION OF CONTROLS
FRONT
f
\
2 3 4 5 6
\U /l L / /
8 9 10 11 12 13 14 15 16 17
REAR
18 19 20 21
DESCRIPTION OF CONTROLS
FRONT:
1. Cassette Loading Slot - To insertor removea
video tape.
2. REC / ITR Button - Press once to start normal
recording. Additional presses activate Instant "13mer
Recording.
3. REW (Rewind) Button -'In the Stop mode, this
button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
4. PLAY Button - Press to play a prerecorded tape.
5. FF (Fast Forward) Button - In the Stop mode, this
buttonrapidly winds thetape forward. In the Play
mode, this buttonactivatesforward search.
6. STOP/EJECT Button - Press once to stopthetape
in any mode. Pressagain to ejectthe tape.
7. Headphone Jack - Plug monauralheadphones or
an earphone withan 1/8"miniplug intothisjackfor
privatelistening.
8. AUDIO/VIDEO IN Jacks -Audio and video signal
cables from an extemal source can be connected
here.
9. INPUT Selector Button - Switchesthe programfor
viewingbetween the VCR and an external input
SOUrCe.
10. SP/EP Selector Button - Sets the tape speed for
recording.
11. CHANNEL +/- Buttons - Pressto select a channel
for viewingor recording.
12. VOLUME +/- Buttons - Pressto raiseor lowerthe
volumeof the sound.
13. REC Indicator- Lightswhenthe'I'VNCR is recording.
14. REC TIMER Indicator - This lightswhen the TIMER
buttonis pressed.
15. ON TIMER Indicator -This indicatorlightsup when
the poweredup. It alsolightsupwhen ON TIMER
program is turnedON whilepoweris OFF.
16. POWER Button - Pressto turn theTV/VCR onor off.
17. Remote Sensor - Signalsfromthe RemoteControl
are received here.
REAR:
18. VHF/UHF Antenna Jack - Connectthe 75 ohm
coaxial cablefromthe antennaorCable TV service
to thisjack.
19, VIDEO/AUDIO IN Jacks -Audio and video signal
cables from an external sourcecan be connected
here.
20. VIDEO/AUDIO OUT Jacks - Used to output audio
and video signals to a "I-V,amplifier or VCR.
21. AC Power Cord - Connect to a 120V,60Hz outlet.
26