Filter
Top Products
ENGLISH
23
DVD
3
Press ENTER.
Digital Out selecting screen appears.
4
Press Cursor ∞ (or 5) to select an
appropriate output, then press
ENTER.
• STREAM: Select this when connecting an
amplifier or a decoder
compatible with Dolby Digital
and with DTS Digital Surround.
• LPCM: Select this when connecting an
amplifier or a decoder
incompatible with Dolby Digital.
• OFF: Select this when you use the
AUDIO L/R (analog) jacks on
the rear.
Only with this setting, you
can enjoy original high-
quality sound of disc whose
sampling frequency is 96 kHz
through the AUDIO L/R jacks.
(No signal will be output from
the DIGITAL OUT terminal.)
For more detailed information about the output
signals, see page 35.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
ENTER
ENTER
H/P VOL
H/P VOL
ENTER
H/P VOL
H/P VOL
TO BE CONTINUED
ENTER
H/P VOL
H/P VOL
DIGITAL OUT
STREAMSTREAM
LPCMLPCM
OFFOFF
RETURN SELECT OK
ENTER
COMPRESSION
FULLFULL
STNDARDSTNDARD
NIGHTNIGHT
RETURN SELECT OK
ENTER
AUDIO
DIGITAL OUT:DIGITAL OUT: STREAMSTREAM
COMPRESSION: STANDARDCOMPRESSION: STANDARD
AUDIO DURING :AUDIO DURING : ONON
¡
RETURN SELECT OK
ENTER
Setting compression
You can compress the dynamic range (difference
between the maximum and minimum sound
levels) while playing a source encoded with Dolby
Digital. This is useful when listening at a low
volume level.
To go back to the previous screen during the
procedure, press RETURN .
1
While holding SHIFT (S), press
MENU/SETUP.
Setup Menu appears on the screen.
2
Press Cursor ∞ (or 5) to select
“AUDIO,” then press ENTER.
Audio menu appears.
3
Press Cursor ∞ (or 5) to select
“COMPRESSION,” then press
ENTER.
Compression Rate selecting screen
appears.
and
MENU
SETUP
SETUP MENU
LANGUAGES
AUDIO
DISPLAY
RETURN SELECT OK
ENTER
SHIFT
S
EN20-28.KV-DV7[J]_f 01.2.21, 8:06 PM23