Filter
Top Products
Preparations
9
XV-C5SL/LET0227-003A/English
Preparations
To use the remote control unit for TV
operation
You can operate your TV from the remote control unit.
To set the remote control signal for
operating your TV
1 Set the TV - DVD switch to “TV.”
2 Hold down TV/VIDEO - CANCEL until
step 4 is finished.
3 Enter the manufacturer code of your
TV listed below by using the numeric
buttons (0 to 9).
Example for a JVC TV:
To enter the manufacturer code “01”: Press “0” then “1.”
Hint
When the unit is shipped, the manufacturer code is
set to “JVC” (01).
4 Press ENTER.
Manufacturer code list
5 Release TV/VIDEO - CANCEL.
6 Try to operate the TV by pressing TV
STANDBY/ON .
If your TV turns on or off, you have successfully set
the control signal.
The following buttons can be used for operating the
TV.
To use 5/∞(CH+, CH–), 2/3(VOL–, VOL+), TV/
VIDEO - CANCEL and numeric buttons for TV
control, set the TV - DVD switch to “TV.”
NOTE
If there is more than one code listed for the manufacturer
of your TV, try them one by one until you succeed.
To control the volume of a JVC’s
amplifier or receiver
You can control the volume of a JVC’s amplifier or
receiver by using the AMP VOL +/– buttons on the
remote control unit.
Pressing the AMP VOL + button raises the
audio volume of the amplifier or receiver, while
pressing the AMP VOL
– button lowers the
volume.
Manufacturer
No.
Manufacturer No.
AIWA 36 MIVAR 29
BEIJING 22 NEC 20
CCE 02 NOBLEX 22
CHANGHONG 34 NOKIA 31
DAEWOO 17, 37 PANASONIC 04, 11
FERGUSON 27 PEONY 34, 38,
39
FINLUX 30 PHILCO 10, 17,
21
FUNAI 32 PHILIPS 02
GRADIENTE 15, 20 RCA 05
GRUNDIG 19 SAMSUNG 12, 33,
34, 35
HITACHI 10
ITT 28 SANYO 13, 16
JINXING 38 SEARS 13
TV/VIDEO
CANCEL
TV STANDBY/ON
ENTER
AMP VOL
TV - DVD
switch
Numeric
buttons
JVC 01, 23,
24, 25
SHARP 06
SONY 07
KONKA 40 TCL 41
LG
(GOLDSTAR)
18 THOMSON 26
MAGNAVOX 02 TOSHIBA 08,14
MITSUBISHI 03 ZENITH 09
Turns the TV on or off.
Switches the TV input mode
between TV and VIDEO.
Selects the TV channels directly.
*For some TVs, pressing “+10”
functions as the “100+,” while
“10” functions as the ENTER
button if your TV requires pressing
the ENTER button after selecting a
channel number.
Mutes the TV sound.
Changes the TV channels.
Adjusts the TV volume.
Manufacturer
No.
Manufacturer No.
TV DVD
TV
TV/VIDEO
CANCEL
~
TV1
1
TV-/--
10
TV0
0
MUTING
+10
CH
+
CH
-
VOL
-
VOL+
AMP VOL
XV-C5SL(B).book Page 9 Friday, February 21, 2003 10:59 AM