Filter
Top Products
30 EN
PLAYBACK AND RECORDING FEATURES (cont.)
Digital TBC/NR (VHS deck only)
Your VCR is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this VCR as the player for editing.
NOTES:
●
If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with Digital TBC/NR set to off.
●
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
●
Digital TBC/NR and Video Stabilizer (
੬
pg. 29) cannot be
used at the same time; if you turn on Digital TBC/NR when
"VIDEO STABILIZER" is set to "ON", Video Stabilizer will be
automatically turned "OFF". Make sure Digital TBC/NR is off
when you want to use Video Stabilizer.
123
456
7
89
0
2
4
1
3
T W
DV VHS
CH
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "VHS MODE
SET" by pressing CH5∞ or
%fi, then press OK or
#
.
SELECT DIGITAL TBC/NR
SET MODE
3
Move the highlight bar
(arrow) to "DIGITAL TBC/
NR" by pressing CH 5∞ or
%fi, then press OK or
#
to
set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
=VHS MODE SET
DV MODE SET
TUNER SET
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
VHS MODE SET
S-VHS ET OFF
S-VHS MODE ON
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
= DIGITAL TBC/NR ON
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
MENU
OK