Filter
Top Products
EN 33
32kHz MODE SOUND YOU HEAR
SOUND1 Original recorded sound
SOUND2 Audio-dubbed sound
FULL SOUND
Original recorded sound and Audio-
dubbed sound
NOTE:
Set "SOUND MODE" to "32kHz" at the original recording on a
Mini DV tape, if you wish to perform Audio Dubbing later.
You can select the soundtrack by simply pressing the
remote control's A. MONITOR button as follows:
L+R → L → R → L+R
Select The Soundtrack
(DV deck)
The DV deck can record two soundtracks simultaneously (L and R)
and play back the selected one, or both together. Or, when
viewing a pre-recorded tape that contains two separate audio
programs, you can choose to listen to either one by selecting
either "L" or "R".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS DV MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "DV MODE SET"
by pressing CH5∞ or %fi,
then press OK or
#
.
SELECT SOUND MODE
3
Move the highlight bar
(arrow) to "SOUND
MODE" by pressing CH
5∞ or %fi, then press OK
or
#
to select "32kHz" or
"48kHz".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
VHS MODE SET
=DV MODE SET
TUNER SET
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
Sound Mode Selection
(DV deck only)
DV MODE SET
=SOUND MODE 32kHz
32kHz MODE SOUND1
DISPLAY OFF
=
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
32kHz Mode Setting
(Audio-dubbed Mini DV Tape)
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS DV MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "DV MODE SET"
by pressing CH5∞ or %fi,
then press OK or
#
.
SELECT 32kHz MODE
3
Move the highlight bar
(arrow) to "32kHz MODE"
by pressing CH 5∞ or
%fi, then press OK or
#
to
select "SOUND1",
"SOUND2" or "FULL
SOUND".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
VHS MODE SET
=DV MODE SET
TUNER SET
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
DV MODE SET
SOUND MODE 32kHz
=32kHz MODE SOUND1
DISPLAY OFF
=
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
NOTES:
When "32kHz MODE" is set to "FULL SOUND":
●
For bilingual tapes, both the main and sub audio will be
audible.
●
To select just the main audio or just the sub audio of Bilingual
tapes, set "32kHz MODE" to "SOUND1".