JVC Model HR-DVS1U VCR User Manual


 
EN 39
Super VHS ET (VHS deck only)
Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
NOTES:
You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
pg. 49) is in progress.
...while Video Calibration (
pg. 34) is in progress.
...when the VCR's power is off.
S-VHS ET does not work with S-VHS tapes.
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded
in S-VHS ET on a VCR equipped with S-VHS ET.
NOTES:
To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
You can play back S-VHS ET recordings not only on this
VCR but also on another VHS VCR equipped with S-VHS
ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from
regular VHS recordings.
S-VHS ET recordings can also be played back on an S-
VHS VCR or a VHS VCR equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be
cases where S-VHS ET playback is not possible on a
particular VCR.
Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
With some tapes, better picture quality may not be
obtained even with S-VHS ET recording. It is recom-
mended that you do test record beforehand to make sure
whether better results can be obtained.
High Grade tapes are recommended for superior results.
Make sure that "VIDEO CALIBRATION" is set to "ON" at
the Function screen (
pg. 34).
During S-VHS ET playback, noise may appear depending
on tape quality.
Noise may appear during still, frame-by-frame and slow-
motion playback.
If the playback picture becomes blurred or interrupted,
use a cleaning cassette.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing CH5∞ or%fi, then press OK or
#
.
SELECT S-VHS ET MODE
3
Move the highlight bar
(arrow) to "S-VHS ET" by
pressing CH5∞ or%fi,
then press OK or
#
to set to
"ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
VHS MODE SET
= S-VHS ET ON
S-VHS MODE ON
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
DIGITAL TBC/NR ON
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END