JVC Model HR-DVS1U VCR User Manual


 
EN 67
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands
of cable boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with a
specified code, try other codes.
TURN ON THE CABLE BOX
1
Turn the power on using the cable box’s remote control.
SET REMOTE CONTROL
MODE
2
Set the VCR/TV/CABLE/DBS switch on the VCR’s
remote control to CABLE/DBS.
ENTER CABLE BOX BRAND
3
While holding down POWER on the VCR's remote control,
use the NUMBER keys to enter the cable box brand
number from the chart at bottom left and then press STOP.
Follow the example shown below.
Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
4
First, press POWER to see if the cable box’s power goes off
as it should. If it does, try other functions (TV CH
+/–
and
the NUMBER keys can be used to operate the cable box).
For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
To return the remote to VCR control, set the VCR/TV/
CABLE/DBS switch to VCR.
CABLE BOX BRAND NAME BRAND CODE
ARCHER 01, 05, 17
CABLETENNA 01, 17
CABLEVIEW 15, 16, 17, 21, 25
CITIZEN 15, 16, 17, 21, 25
CURTIS 02, 08
DIAMOND 01, 17
EASTERN 19
GC BRAND 15, 16, 17, 21, 25
GEMINI 15
GENERAL INSTRUMENTS 01, 04, 06, 11, 12, 15
HAMLIN 10, 18, 19, 23
JASCO 15
JERROLD 01, 04, 06, 11, 12, 15
NOVAVISION 02, 08
OAK 07, 20
PANASONIC 13, 14
PULSER 15, 16, 17, 21, 25
RCA 13, 14
REGAL 10, 18, 19, 23
REGENCY 19
REMBRANDT 01, 16, 17
SAMSUNG 05, 16, 24
SCIENTIFIC ATLANTA 02, 08
SIGMA 07, 20
SL MARX 05, 16, 17, 24, 25
SPRUCER 13, 14
STARGATE 05, 15, 16, 17, 21, 24, 25
TELEVIEW 05, 16, 24
TOCOM 01, 04, 16
UNIKA 01, 17
UNIVERSAL 16, 17, 25
VIDEOWAY 03, 09, 22
ZENITH 03, 09, 22
NOTES:
You must set the cable box brand for your remote control and
the cable box brand for your Controller (
pg. 16) separately.
The list of cable box brands that can be controlled by your
remote control is different from the list of brands that can be
controlled by your controller.
Depending on the type of cable box, there may be cases
where some or all functions cannot be operated using the
remote control.
It's not possible to set the remote control for both your cable
box and a DBS receiver at the same time. You can only set the
remote control to operate one of these units at a time.
(Ex.) To set remote control to RCA 14:
Hold down Press in succession
Release
123
456
7
89
0
2
4
1
3
T W
DV VHS
POWER
STOP
ENTER
NUMBER
VCR/TV/CABLE/DBS
STOP
4
1
POWER
TV CH +
TV CH –