JVC RM-HP790DU Universal Remote User Manual


 
8
Connection
Standard connection of the RM-HP790DU/
RM-HP790DE (Connection of a single unit)
When the RM-HP790DU/RM-HP790DE is connected to a camera.
Memo :
When the RM-HP790DU/RM-HP790DE is connected to a camera, a local remote controller cannot be connected to the camera.
* 1 When connect the remote control unit cable to the [REMOTE] connector, please be careful to the following points.
To reduce the emission of unwanted radio waves and to avoid electrostatic influence, be sure to attach the provided clamp
filter attached in RM-LP25U as shown in the figure.
Attach the clamp filter as close to connector as possible.
* Models with an E suffix are for the European market and the UL Listing mark is not applicable.
Example of Basic
Connection
REMOTE
Y/G PB/B PR/R
ACHIN AC120V 60Hz
TALLY
PGM PVW C
INTERCOM
AUX VIDEO INPUT GENLOCK INPUT
VIDEO OUTPUT
H
RTS
CG
COMPOSITE VIDEO
CAMERA CABLE
HD/SD SDI
INPUT
OUTPUT
*1
GY-HM790U/GY-HM790CHU/
GY-HM790E*/GY-HM790CHE*
Studio Viewfinder
VF-HP790G
Studio Adapter KA-790G
Headset
(Beyerdynamic)
Multicore Remote Adapter
KA-M790G
Camera Cable (26Pin)
VC-P110U (5m)
VC-P112U (20m)
VC-P113U (50m)
VC-P114U (100m)
Camera Remote Control Unit
RM-HP790DU/RM-HP790DE
Remote Control Unit
RM-LP25U
Monitor
Clamp filter
Wind once
To power supply
Headset
(Beyerdynamic)
Coaxial cable
(The illustration shows the RM-HP790DU.)