22
Menu Operation
The values set with the menu and applied to the
RM-HP790DU/RM-HP790DE can be saved in four files
named A, B, C and D.
1 Press and hold the [MENU] button for 3 seconds until
the LCD display shows the menu display
The cursor (
J
) indicates that the item being pointed to can
be varied.
2 Turn the
[SHUTTER]
control knob to move the cursor
(
J
) to A3: FILEB
3 Press the
[SHUTTER]
control knob to move the cursor
(
J
) below to A3A: LOAD FILEB
Ⅵ Storing data in a file
4 To store data in one of the two files, press the
[SHUTTER]
control knob to move the cursor (
J
) to
A3B: STORE FILEB
5 Press the
[SHUTTER]
control knob again to move the
cursor (
J
) to AAB
6 To store data in file B, turn the control knob to move
the cursor (
J
) to file AAB (Similar for ACB, ADB)
7 If the
[SHUTTER]
control knob is pressed now, the
LCD display shows ASTORE FILE BB and the cursor (
J
)
moves to ACANCELB
If it is not required to write data now, the [SHUTTER] control
knob should be pressed again.
8
To store data in a selected file, turn the [SHUTTER]
control knob to move the cursor (
J
) moves to
A
EXECUTE
B
9 Press the
[SHUTTER]
control knob to write data in a
selected file and return to the previous display
Ⅵ Loaging the data in a file
To read previously written data, in step 3 move the cursor
(
J
) to A3A: LOAD FILEB, then perform the same operations
as in steps
4 to 9.
Ⅵ Resetting data in a file
To reset saved data to the factory settings, in step 3 move
the cursor (
J
) to A3C: RESET FILEB, then perform the same
operations as those in steps
4 to 9.
Memo :
● During LOAD FILE and RESET FILE, ANOW
INITIALIZINGB and AJUST A MOMENTB will be displayed
on the LCD.
FILE Menu
M
FULL AUTO F1
SHUTTER
GAIN
F2
F3
MENU/SHUTTER GAIN
P
R
STEP
SHUTTER
MENU
PUSH-ON
DOWN UP
VARIABLE
PUSH-ON
HIGH
LOW
MID
DOWN UP
F4
BARS
STR
CMP
OFF
+0 dB
ALC
LUX
[SHUTTER] control knob
LCD display
[MENU] button
1: GENLOCK
2: CABLE
C
ursor
3: FILE
4: PROCESS
Cursor
3A: LOAD FILE
A
3B: STORE FILE
A
3B: STORE FILE
A
3B: STORE FILE
B
3B: STORE FILE
CANCEL
3B: STORE FILE
EXECUTE
STR
CMP
OFF
0 dB
ALC
LUX