Filter
Top Products
Timer Settings
25
Timer Settings
You can use the timers for recording a programme with your video
recorder on time. 14 timers are available which you can set to different
channels as well as start and end times.
To access the timer setting, press
to enter the main channel
menu,
to go to system parameters, followed by and
to local time/ timer and . You now see the display:
Press the buttons to move the cursor to the timer you
require and confirm it by pressing
. Press to exit the timer
again.
Incorrect time settings will be rejected.
You can select and set
• the type of channels (TV, radio or software download)
• the channel location with channel name
• the start time (day, months, year, hour, minute)
• the stop time
• the timer status – inactive/once/daily/weekly
for 14 timers. You must
enter leading zeros for the time settings.
Use the
and the number buttons to make the required setting.
The current time that you must re-enter appears under the start time.
If no other setting is entered, the end time will be set automatically to
the same date and one hour after the start time.
Finally confirm the settings by pressing
or 3x.
If you have preprogrammed a download using a timer, all
subsequent timer settings will be ignored after successful
download!
VPS signal
No VPS signal is transmitted for digital television.
You will therefore need to programme your video recorder
corresponding to the timer settings.