Filter
Top Products
Installation
49
Pay attention to the help
information on the
individual menu items
you can obtain b
y
pressing the button!
Manual search
The manual search is recommended when you already know the
channel data, frequency or channel number. Use the
buttons to select one of the two settings you can change step-by-step
until you receive a signal. The bar on the left indicates when a signal
is received.
Figure above: Correct network, wrong channel, wrong frequency
Figure below: Correct network, right channel, right frequency, signal
indicator "good"
You must enter the network, channel and frequency otherwise
the manual search will not be adopted!
Channel entry: Select the respective channel using the
buttons or
the number buttons. For this purpose, press
and enter the
required channel number. After pressing
again, the channel is
changed to the corresponding frequency.
Frequency entry: This function is intended for service purposes only
and permits manual entry of the channel frequency.