Filter
Top Products
Setting System Parameters
53
A/V mode
Using the buttons, here you can select the type of video signal
applied at the SCART socket. Select the signal that your TV set can
process.
Refer to the operating manual of your TV set!
• Composite colour signal – basic band signal (FBAS)
• RGB – Red/Green/Blue signal or
• Y/C – S-VHS signal (luminance/chrominance)
Confirm your selection by pressing
twice.
Installation menu
You should not change the following settings without good reason as
they represent factory settings or operational settings that are adapted
to your receiving system.
New settings are only required when changes or expansions are
made to the reception system.
The main menu consists of the following submenus:
Select the "Installation" menu with the menu button
, the
buttons in the main menu and . If set, you must also
enter the password. Select the menu items with the
buttons.
Network configuration
You can remove and add networks in this menu. Please refer to the
TV program magazines and periodicals as well as to the Internet for
information on new programmes in new networks. Press
to open
the menu.