Filter
Top Products
Sound Settings
26
Sound Settings
Setting the volume
Set the required volume level by pressing the buttons on the
remote control of the receiver. A bar indicator is displayed on the
screen to show the set volume.
Stereo and two-channel sound reproduction
The channel identifier that you can display by pressing the button
shows the set sound reproduction. (Depending on the direction of the
symbolized sound waves – under the displayed time – mono left,
mono right or stereo can be set. The digit indicates the number of
transmitted sound channels). The channel title is shown in the box on
the right.
Press the
button to call up the audio menu for sound and
language selection. You can now make the required settings, e.g.
language selection, provided the corresponding data are contained in
the reception signal (sound track), Dolby Digital (5.1 CH). Select the
menu items by pressing the
buttons and select the required
setting with the
buttons. Press the button once again to exit
the menu.
If subtitles are also transmitted, you can use the
buttons to select
the language in the subtitle bar and confirm setting with
.