Filter
Top Products
Setting the System Parameters
54
• Multi-Standard or
• NTSC
Confirm by twice pressing
.
Picture Format
Use the
keys to select the picture format your TV set is suitable
for, namely either
• 4:3,
• 16:9 or
• Auto
Confirm by twice pressing
.
Screen
Use the
keys to set the kind of screen presentation
• Normal (P/S) = normal presentation for 4:3 TV sets or
• Wide (Letter-Box-Display off) – in this setting, the wide picture
format for the 16:9 TV set is imposed on.
Confirm by twice pressing
.
A/V Mode
Use the
keys to select the type of video signal on the Scart-
Socket. Select the signal your TV set can process.
Refer to the manual of your TV set!
• Composite Colour Signal
• RGB – Red /Green /Blue signal or
• Y/C – S-VHS signal (Luminance/Chrominance)
Confirm the selection by twice pressing
.
Factory Setting
In this position you can reset all settings to the factory settings by
pressing
. The factory settings need not necessarily correspond to
the settings required for your receiving installation. It may well be that
you will have to make all settings once again after a reset.