Filter
Top Products
16
Press the
and
buttons here to select the
satellites you want tuners 1 and 2 to receive signals
from. When you press
to confirm your selection,
the chosen satellite is moved into the tuner satellite
list on the right.
If you have unintentionally transferred a satellite
into the list on the right, you can press the
button
to switch lists and then press
to remove the
satellite concerned.
When you have selected all the satellites you want,
press
.
First Installation
Press the
and
buttons here to select the
satellites you want tuner 1 to receive signals from.
When you press
to confirm your selection, the
chosen satellite is moved into the tuner satellite list
on the right.
If you have unintentionally transferred a satellite
into the list on the right, you can press the
button
to switch lists and then press
to remove the
satellite concerned.
When you have selected all the satellites you want,
press
.
Select here the satellites you want tuner 2 to receive
signals from, as you did for tuner 1.
When you have selected all the satellites you want,
press
.
Signal configuration
“As tuner 1”
Signal configuration
“Different to tuner 1”
Press
to view the satellites by continent - that is, which satellites are accessible on which continent. The
continents are displayed above the list of satellite names. The selected continent is shown in yellow.
The satellites from the pre-programmed channel list are automatically pre-entered in the right-hand column,
and can be changed/deleted according to your reception system.