Filter
Top Products
76
Recording List
The receiver automatically starts playing back the recording. You now
have several options for specifying the range to be cut (see example
bar):
You can only remove one block
from the recording in each cut
operation. To remove multiple
blocks you have to repeat the
process.
To set the exact times for the start and end markers as quickly as
possible you can use various buttons as aids:
- Press
to stop playback and freeze the frame
- Use the
buttons to rewind or fast forward at up to 24 times
playback speed (you can only fast forward recordings which have not
yet decoded at 4 times playback speed and rewind them at 8 times
playback speed)
- Use the
buttons to jump forward or back in 30-second blocks
Cut the range marked “Start” as follows:
- Move to the end of the range you want to cut and press
. Then
press
to set the start point marker of the range to be cut. The
receiver automatically marks the full range back to the start of
recording. Then press
to set the end marker at the end of the
recording range you want to cut.
Cut the range marked “Middle” as follows:
- Move to the start of the range you want to cut and press
. Then
press
to set the start marker and move forward to the end of the
cut range. Press
again and
to set the end marker.
Cut the range marked “End” as follows:
- Move to the start of the range you want to cut and press
. Then
press
to set the start marker and press
to automatically select
the full range to the end of the recording.
Press
to remove the selected range from the recording, or press
to reset the markers.
Start Middle End