Filter
Top Products
90
Installation Menu
DiSEqC™ Switch:
Use the
buttons to make your selection.
- 1 of 4: for the first satellite of the tuner
- 2 of 4: for the second satellite of the tuner
- 3 of 4: for the third satellite of the tuner
- 4 of 4: for the fourth satellite of the tuner
- Mini A: Tone-burst control signal 1 for the first satellite of the tuner
(if reception system not DiSEqC™ compatible)
- Mini B: Tone-burst control signal 2 for the second satellite of the tuner
(if reception system not DiSEqC™ compatible)
- Disable: If your reception system is not DiSEqC™ compatible and
only one satellite per tuner is selected.
Transponder:
Use the
buttons to scroll through transponders on the selected
satellite. At the bottom right you will see the signal strength of the
transponder on the two tuners, enabling you to check that the satellite
configuration you just set up is OK.
Save:
Once you have made all the settings, use the
buttons to select
“Save” and press
to save the data.
Tuner 2 Setup
Settings are made as detailed for tuner 1.
Channel Search
Use the
buttons to select whether you want the search to cover
all satellites or only a specific one. If you select “All Satellites” only
“Automatic Search” mode is possible. If you choose a specific satellite,
your options are: