Filter
Top Products
75
You can use this function, for example, to remove ad breaks from your
recorded programmes.
Make sure you have also selected “Cut” with the
button.
Use the
buttons to select the recording you want to cut and
press
. The following display appears (example):
Cut
Also pay attention to the bars
at the bottom of the on-screen
display! They provide hints on
what to do next.
The removed portion of
a recording cannot be
recovered! Make a backup
copy of the recording before
cutting it for the first time (see
“Copy”).
Copy the range marked “Middle” as follows:
- Move to the start of the range you want to copy and press
. Then
press
to set the start point marker of the range to be copied. Then
move on to the end of the copy range. Press
again and
to set
the end marker.
Copy the range marked “End” as follows:
- Move to the start of the range you want to copy and press
. Then
press
to set the start point marker of the range to be copied.
Then press
to automatically mark the full range to the end of the
recording.
Copy the complete recording as follows:
- Press
twice to select the complete recording.
Press
to copy the selected range (the selection will be darkened
on-screen) or press
to reset the markers.
The UFS 821 then internally duplicates the selected recording range as
a new recording. When the copy operation is complete the recording list
appears. The copy is indicated by a “C:” in front of the name.
Recording List