Filter
Top Products
97
Installation Menu
Edit Transponders
Satellite Name:
Press
to access a list of all stored satellite. Use the
buttons to select the satellite you want.
Transponder Frequency:
Use the
buttons to select the transponder frequency.
New Transponder:
Press
to access the input form to enter the data of a new transponder
on the satellite you previously selected.
Enter the data (frequency, polarisation, symbol rate) using the number
pad and the
buttons. When you have entered all the data
and settings, use the
buttons to select “OK” and press
to add
the new transponder. The new transponder is inserted into the list of
available transponders on the satellite.
Delete Transponder:
Press
to delete the current selected transponder. Use the
buttons to select “OK” on the on-screen prompt and press
to confirm
deletion of the transponder and its channels.
Only make changes to this menu when settings or circumstances
relating to the transponders have changed. The settings should be
made by a specialist engineer.
Deleted transponders can be
re-located by way of an automatic
search with active network
search on the transmitting
satellite.
On Air Download
See “Software and Programme List Update” section