Filter
Top Products
96
Installation Menu
Edit Satellite Data
Satellite Name:
Press
to access a list of all stored satellite. Use the
buttons to select the satellite you want.
Transponder Frequency:
Use the
buttons to select the transponder frequency.
Edit Satellite Longitude:
Use the number pad to key in the new longitude. Use the
buttons
to choose between E (East) and W (West).
New Satellite:
Press
to enter the name of a new satellite using the alphanumeric
keypad (see “Alphanumeric Inputs”).
You can now edit the “Satellite Longitude” setting for this satellite.
Delete Satellite:
Press
to delete the current selected satellite. Use the
buttons
to select “OK” on the on-screen prompt and press
to confirm deletion
of the satellite with all its transponders and channels.
Only make changes to this menu when settings or circumstances
relating to the satellites have changed. The settings should be
made by a specialist engineer.
Deleted satellites must be re-
entered manually. If the satellite
was factory pre-programmed, it
can also be restored by a factory
reset. All your personalised
settings (such as Favourite
lists) will be lost in the process
however.