18
With this receiver you can copy a programme directly from the EPG, the programme preview, or the
additional information, to the timer by pressing the
button (red dot).
The following display appears (example):
The receiver copies the data available from the EPG directly to the information for programming
the timer. You can still change these settings using the
buttons and the number pad
(e.g. start recording fi ve minutes earlier). You can also repeat a recording (every day or every week).
Select “Store” using the
buttons and confi rm the activation of the timer by pressing the
button.
The receiver automatically uses the next spare time position and returns to the EPG.
As in the majority of cases, VPS data are not transmitted in the digital signal, you must
program your external recorder identically to the receiver.
TIMER PROGRAMMING FROM EPG
OPERATION
Press the
"
button (yellow) to view the audio and subtitle language (TV or radio) broadcast
over the channel received. Select the line to be changed using the
buttons and make the
required selection using the
buttons. If the channel is not transmitting language information,
the receiver displays “None”. Save the setting by pressing the
"
button (yellow) and return to the TV
picture.
Scart Enable:
Select “SCART Enable” using the
buttons. Switch off the signal on the TV Scart socket by
pressing the
button. You can reactivate the TV Scart socket by pressing any button on the remote
control.
AUDIO