Filter
Top Products
70 KDV-5234
BMS
With this function, you can control the amplification
amount for the bass range of the optional power
amplifier with B.M.S functions that is connected by EXT.
CONT. cable.
Values to be changed and the operation of the
amplifier during the change may differ according to
the amplifiers. For details, refer to the operation manual
of the connected power amplifier.
For the amplifier with B.M.S function, refer to the
catalog.
BMS F
This function adjusts the central frequency of the bass
amplification being set by "BMS".
Setting at "LOW" reduces the frequency by 20–30%.
CD READ (Reading a CD)
Specifies the method for reading a CD.
When a specially formatted CD does not play properly,
specifying "2" will make the CD play. Please note that
even after selecting "2", it will not be possible to play
some music CDs. Also, if you set it to "2", you cannot
play audio or picture files. Under normal circumstances,
set at "1".
1 : It automatically distinguishes between a disc with
audio files/picture files and a music CD during
playing the disc.
2 : It overrides to play the disc as a CD.
CODE SET (security code set)
The security code is set.
Once a security code has been set, when the
unit is used for the first time after the unit has
been unplugged, the unit's power cord has been
disconnected or the reset button has been pushed, the
power will not turn on unless you enter the set security
code. In other words, this function helps prevent theft
as the security code must be entered after the unit has
been removed from the vehicle.
DIM (Dimmer)
Display brightness automatically switches on in
conjunction with the vehicle light switch.
DISP
When set at the "OFF" position, the display disappears
if the unit is not operated for a period of five seconds.
This prevents the display from being reflected in the
vehicle's windows.
However, if any of the modes have been set the display
will not disappear even after five seconds.
When the display is off, pressing any buttons will return
the display.
Please note that when the display disappears, the
only operations that can be performed are turning
the power ON and OFF, adjusting volume, selecting a
source and ejecting a disc.
DSI (Disabled system indicator)
Turns the security indicator ON and OFF.
When this function is ON and the panel has been
removed, the LED for the [0] (Eject) button flashes so
that it functions as a theft prevention warning light.
KEY (Button illumination)
You can choose green or red for illuminating the
buttons.
LO.S (Local Seek)
Only stations whose reception is good are searched in
auto seek tuning.
MONO (Monaural)
This function switches FM stereo broadcast to mono
sound.
When you listen to the FM station with poor reception
condition, switching to mono sound will reduce the
noise and may become easier to listen to.
M/V (Microvision Version)
Displays the version of copyright protection technology
used in a DVD.
Help? Term