Filter
Top Products
English 71
Help?
NEWS (News Bulletin with Timeout Setting)
The tuner automatically changes when a news bulletin
starts even if the radio is not being listened to. Also,
you can set the time interval when interruption is
prohibited.
When you set "NEWS 00MIN" — "NEWS 90MIN", the
News Bulletin Interrupt function is ON.
When the News Bulletin is ON, the "NEWS" indicator
is ON.
When the news bulletin starts, "NEWS" is displayed, and
the tuner changes to the news bulletin.
• If you choose the "20MIN" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
• The news bulletin volume is the same level that was
set for <Traffic Information> (page 38).
• This news bulletin function is only available if the
desired station sends PTY-code for news bulletin or
belongs to <Enhanced Other Network>-Network
sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, the
tuner changes to an FM station.
OFF (Power OFF Timer)
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery power.
REG (Region Restrict Function)
You can choose whether or not to restrict the RDS
channels, received with the AF function for a particular
network, to a specific region.
If AF function is not restricted to the specified region
and network, the AF function sets up to search the
station with good reception in the same RDS network.
SCL (Scrolling)
In cases where there are too many characters to display
all the information when selecting disc or track titles,
disc or track text, group titles, folder names, file names,
track names and artist names or album names on the
display, use this function to scroll down so that all the
information is displayed.
Setting this function to "AUTO" will perform the scroll
display once when the display changes, while setting
to "MANU" will prevent the display to scroll.
SWPRE (Switchable preout)
This function sets audio to be output by the preamp
output terminal.
R : Rear sound is produced. This is set when rear sound
is produced from the optional power amplifier.
SW : Outputs audio used by the subwoofer.
AV : Outputs audio not affected by audio controls. Is set
when connected to a rear monitor.
SYNC (Synchronize Clock)
Synchronizes time data sent from an RDS station
with the unit's built-in clock.
Synchronization takes 3 to 4 minutes.
ZONE2
Sets the output source (front speaker or rear speaker)
for the sub source (built-in AUX input or DVD) when
the dual zone function is ON.