Filter
Top Products
16
Chapter 1: Connection of Equipment
Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5
Chapter 6
Chapter 7
Chapter 8
1-6-3 : Digital output connection
1
2
21
L
R
DIGITAL
DVD
CONTROL
CONTROL
MAIN
MAIN-SUB
SWITCH
SUB2
SUB1
COAXIAL
IN
OUT
OUT
INPUT OUTPUT
FRONT SURROUND
CENTER
SUB WOOFER
DAISY CHAIN
AUDIO
COMPONENT VIDEO
S VIDEO
VIDEO
OUTPUT
6 CH. OUTPUT
INPUT INPUT
YC
B CR YCB CR
OUTPUT
OUTPUTMIX LINE
OPTICAL
(PCM/BIT STREAM)
INTERLACE PROGRESSIVE
COMPONENT
VIDEO
OUTPUT
COAXIAL OPTICAL
Coaxial cable
(Provided)
Dust protection cap Align the plug
with the terminal
Illust model : DV-5900M
Optical cable
Speaker Setting
or
Note : When connecting the optical digital audio cable
÷ Remove the dust protection cap from the optical digital audio output terminal
and connect the cable firmly so that the configurations of both the cable and
the terminal match.
÷ Keep the dust protection cap and reattach when not using the terminal.
1
2
21
L
R
DIGITAL
DVD
CONTROL
CONTROL
MAIN
MAIN-SUB
SWITCH
SUB2
SUB1
COAXIAL
IN
OUT
OUT
INPUT OUTPUT
FRONT SURROUND
CENTER
SUB WOOFER
DAISY CHAIN
AUDIO
COMPONENT VIDEO
S VIDEO
VIDEO
OUTPUT
6 CH. OUTPUT
INPUT INPUT
YC
B CR YCB CR
OUTPUT
OUTPUTMIX LINE
OPTICAL
(PCM/BIT STREAM)
IN TERL ACE PROGRESSIVE
COMPONENT
VIDEO
OUTPUT
Illust Model : DV-5900M
Speaker Setting
To 6ch Input terminal
1-6-2 : 6 channnel (5.1 ch) audio connection (DV-5900M only)
÷ When a DVD AUDIO disc is played, the player can output audio signals at very
high frequencies. As this may sometimes lead to speaker damage due to a high-
volume sound, do not set "Audio Filter" to "Filter 110 kHz" when the speakers
in use are not suitable for high-frequency reproduction. j
÷ When connection of 3 or more channels is required, connect the audio inputs
to the 6ch OUTPUT connectors on the rear panel according to the speakers in
use.
After connection, set the non-used speakers to “OFF” with the “Speaker setting”
function. k
Setup for 6-channel audio connection:
÷ When the audio is connected using the 6CH. OUTPUT terminals, set the player
as follows. "Speaker Setting" k
When the connected AV amplifier has 6-channel audio input terminals, Please con-
nect the 6CH. OUTPUT terminals to them.
Use the DIGITAL output terminal when using an external decoder (or an AV amplifier
with built-in decoder) to decode Dolby Digital and DTS Digital Surround signals.
To use the external decoder, it is required to change the “SOUND” setup in the Set Up
menu. h
Speaker setting
The speakers are to be set up on the amplifier. k
Audio filter (Speaker protect)
The audio filtering is to be set up on the amplifier. j