Kenwood DV-5050M DVD Player User Manual


 
80
Chapter 7 : Various Setups
Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5
Chapter 6
Chapter 7
Chapter 8
b : "Speaker Setting Quick" (DV-5900M only)
For the "Speaker Setting" when an AV amplifier
is connected digitally to the player, refer to the
instruction manual of the AV amplifier.
Three kinds of speakers can be set, including the
"Center Speaker (C)", "Surround Speakers (SL/
SR)" and "SubWoofer (SW)".
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "SOUND" menu of "SET UP MENU".
2. Press the ENTER button to open the setup screen.
3. Press the cursor cursor up, down button to select
Speaker Setting (Quick)” in set up menu “SOUND”,
then press the ENTER button.
4. Place the cursor on the speaker name you want to set to
"Use" or "Do not use", then press the ENTER button.
Speaker level setting using Test Tone
Operation procedure
1. Perform steps 1 and 3 of “Speaker Setting Custom”.
k
2. Press the cursor button to select the “Test” button.
÷ The Test Tone will be output from each speaker for
a specified period of time, in the sequence
beginning with the L CH speaker and ending with
the Surround R CH speaker.
÷ The speaker from which the Test Tone is being
output is indicated by the cursor on the screen.
3. When the cursor moves to the speaker to be set, press
the ENTER button.
4. Press the cursor left, right button to select the level to
be set, and press the ENTER button.
÷ Adjust so that the volume from all speakers is
identical.
5. Press the cursor button to select “Exit”, then press the
ENTER button.
5. Each press of the ENTER button turns on and off the
corresponding speaker icon in the graphic room at
the lower half of screen alternately. When the selected
kind of speaker is to be used, the corresponding
speaker icon should be displayed.
6. To set the use of other kinds of speakers, repeat step 4
for each of them.
7. After completing the setting, place the cursor on "Exit"
and press the ENTER button.
Test
SL
C
SW
R
R
SRSL
SR
Exit
L
L
SW
C
Speaker Setting (Quick)