Kenwood KRF-9300D DVD Player User Manual


 
52
KRF-V9300D/KRF-V8300D/KRF-V7300D
Surround effects
Dolby Digital, Dolby Digital EX, Dolby Digital Plus and Dolby TrueHD source
Connected audio input jack HDMI, OPTICAL, COAXIAL HDMI
Dolby Digital /
Dolby Digital EX
Dolby Digital Plus Dolby TrueHD (96kHz and lower)
Dolby TrueHD
(176.4kHz/ 192kHz)
*
/2
2ch Others
*
/2
*
/3
*
/4
2ch Others
*
/2
*
/3
*
/4
2ch Others
Dolby Digital
Dolby Digital + Pro Logic IIx Movie*
1
Dolby Digital + Pro Logic IIx Music*
3
Dolby Digital EX*
3
Dolby Digital Plus
Dolby Digital Plus + Pro Logic IIx
Movie*
1
Dolby Digital Plus + Pro Logic IIx
Music*
3
Dolby Digital Plus + Dolby EX*
3
Dolby TrueHD
Dolby TrueHD + Pro Logic IIx
Movie*
1
Dolby TrueHD + Pro Logic IIx Music*
3
Dolby TrueHD + Dolby EX*
3
Pro Logic IIx Movie/
Pro Logic II Movie*
2
Pro Logic IIx Music/
Pro Logic II Music*
2
Pro Logic IIx Game/
Pro Logic II Game*
2
Pro Logic
Stereo
Input signal
Listen mode
*
1
Can be selected only when both the surround back left and right speakers are connected (7.1-channels).
*
2
Pro Logic II is selected if no surround back speakers are connected.
*
3
Can be selected when one or more surround back speakers are connected.
Certain listen modes may not be selected depending on the input signal type and speaker setup.
If the surround effect cannot be obtained or the desirable listen mode cannot be selected, check the following setups.
− Speaker setup
− Input mode setup
− Audio setup of the player component
When a digital signal with a number of channels exceeding the current speaker setup is input, the input signal is downmixed automatically
according to the current speaker setup.
Note on input signals
"
*
/2" or "
*
/3", etc, in the table under <Input signals and corresponding listen modes> indicate the channels encoded in the input signal.
When an encoded signal is input, the input channel indicators on the display panel light as follows.
*
/2 : , , , ,
or
, , ,
*
/3 : , , , , ,
or
, , , ,
*
/4 : , , , , , ,
or
, , , , ,
2ch : ,
Others : Dual Mono ( , ), 3/0 ( , , ), 3/1 ( , , , )
For "LFE" and "S" input channel indicators, see <About indicators> p.
Input signals and corresponding listen modes