Kompernass KH 6516 DVD Player User Manual


 
- 16 -
MemoryStick memory cards (MS/MSPro)
MemoryStick memory cards must be inserted into the upper memory card
compartment. Insert MF memory cards into the upper memory card compartment
contacts first and straight.
For this purpose...
- the side of the memory card that the contacts are on must be facing
downwards and
- the slanted corner of the memory card must be on the left side.
USB memory sticks (USB)
The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity
of 512MB.
USB memory sticks must be inserted into the USB port.
Press the
DVD/CARD/USB button on the remote control and with the control
buttons select the entry USB. subsequently press the
OK button to
display the contents of the memory card.
This procedure also applies to particular memory cards.
If the USB memory stick is inserted correctly into the port the green
control light next to the lower loading slot will light up.
11.3 Removing memory cards/USB memory sticks
Memory cards/USB Memory sticks should only be removed after the memory
card slot is deactivated. Thus avoiding the possibility of damage or data loss.
Press the button
DVD/CARD/USB on the remote control to return to the DVD
mode. For this a disc must be inserted into the DVD player. The green
control light next to the memory card slot will go out.
You can now remove the memory card/USB memory stick from the memory
card slot.
USB
512 MB
Brand
MS CARD
128 MB
12. Playing back DVDs, VCDs or S-VCDs
To play back a DVD/VCD/S-VCD with the DVD player...
Switch on your television.
Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices
(i.e. an audio component) are ready for operation and are switched on and
the DVD player is connected correctly to the television you will now see the
"Silvercrest" logo on the TV screen
Open the disc tray on the front panel of the DVD player by pressing
the button
OPEN/CLOSE on the front panel of the DVD player or on the
remote control.
OPEN will now appear In the display on the front panel of the DVD player
and on the television screen.
Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled
side up.
Press the button
OPEN/CLOSE on the front panel of the DVD player or on
the remote control again to close the disc tray.
CLOSE will appear in the display on the front panel of the DVD player and
on the television screen while the disc tray is closing.
The contents of the inserted DVD/VCD/S-VCD will now be loaded; this
may take a few seconds. In the meantime LOAD flashes in the display
on the front panel of the DVD player and Loading... is displayed on the
television screen.
Playback of the inserted DVD/VCD/S-VCD starts automatically.
Note:
DVDs, VCDs and S-VCDs, that you want to playback with the DVD player
possibly have a country code, which is printed on the DVD cover.
The DVD player can only playback DVDs/VCDs/S-VCDs with the country
code 2.
If no country code is printed on the cover of a DVD/VCD/S-VCD...
• but instead the symbol , then the DVD/VCD/S-VCD can be played
back with the DVD player
• then the DVD/VCD/S-VCD can possibly not be played back with the
DVD player. You can check this by attempting to play back the DVD.