Filter
Top Products
- 7 -
8. Connecting the DVD Player to a television
After setting up the DVD player, you can now connect it to a television.
The DVD player can be connected to a television that operates with the PAL,
NTSC and SECAM standards.
If you want to use the DVD player on a television with the NTSC standard
you must change the video setting in the DVD players "OSD menu". There
PAL is set as the television standard at the factory.
On this topic see also chapter 10.3.
"Video settings: Setting the TV standard".
Depending on the features of the television, there are various options for
connecting the DVD player to it:
8.1 Connecting to a television via ScartCable/RGB
Note:
Connecting the DVD player to a television with a Scart cable via the
RGB input offers a high quality connection. Select this connection variation
in the case of televisions equipped with an RGB input. If you are not sure
if the television is equipped with an RGB input then you can check this
by consulting the television's instruction manual.
• Connect the jack inscribed with
EURO SCART to a television Scart socket by
using the supplied Scart cable.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu
Video/Video Out/RGB
.
On this topic see also chapter 10.3
"Video settings: Video output".
8.2 Connecting to a television via S-Video
Note:
For this type of connection the television must have available an S-Video
input and two audio "IN" cinch sockets. If you are not sure if the television is
equipped with S Video and/or cinch sockets you can check this by
consulting the television's instruction manual.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• an S-video cable (not supplied) These can be obtained from your
dealer.
In order to connect the DVD player to a television via S-video
• Connect the jack inscribed with
S-VIDEO to a television S-Video socket
using an S-video cable.
• Insert the white audio cinch cable plug into the cinch socket inscribed
L on the rear panel of the DVD player.
• Then insert the white plug at the other end of the audio cinch cable into
the left channel audio socket on the television.
• Insert the red audio cinch cable plug into the cinch socket inscribed
"R" on the rear panel of the DVD player.
• Then insert the red plug at the other end of the audio cinch cable into
the right channel audio socket on the television.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select from the menu
Video/Video Out/RGB
.
On this topic see also chapter 10.3
"Video settings: Video output".