KVH Industries eTrac Satellite TV System User Manual


  Open as PDF
of 37
 
1.3.1 Additional Materials Required for eTrac Use
To make full use of your new eTrac system, you will need to provide/purchase the
following:
• A Windows
™
-compatible computer or optional Thrane & Thrane
Message Terminal
• 14 AWG shielded, stranded marine cable to connect to ship’s power
• Serial data cable (not a null modem cable) with DB9 connectors (male
to female) to connect the computer to the Breakout Box
• 3 M4 screws and washers
• Additional cables as necessary to connect peripherals to the
Breakout Box
• Optional - pole-mount kit (part number 34-3026-101)
• Optional - rail-mount kit (part number 34-3026-103)
• An Inmarsat-C registration and an Inmarsat mobile number
Introduction
1-534-0002Rev.D
YoumustreceiveamobilenumberforyoureTracsystemfroman
InmarsatServiceProviderbeforeeTraccanbeconfiguredand
used.PleaserefertoSection2.4.1,“RegisteringeTracasanMES”
forinstructionsonapplyingforandreceivingamobilenumber.As
thisprocesscantakesometime,KVHrecommendsthatyousubmit
yourapplicationimmediatelyuponpurchasingyoureTracsystem.
 previous next