Filter
Top Products
INITIAL SETTING
Once the initial programming is entered, it is retained in memory until changed. The
player will always be operated under the same conditions even if the set is shut off.
Common procedure for initial settings is as follows:
1 Press SETUP button in the stop mode, a menu like below will appear on your TV.
2 Move the DIRECTION buttons ( & ) to select the preferred item.
3 Press SELECT button, and a sub-screen will open. Each screen for setting the value is displayed (SELECT button is similar to an ENTER
button on a computer).
4 Move the DIRECTION buttons ( , , & ) to select what you want to change.
5 Press SELECT button to confirm (this is like the ENTER button on a computer).
6 Press SETUP button to close the initial menu and return to STOP mode.
3&5
(
SELECT
BUTTON)
2&4
(DIRECTION
BUTTONS)
1&6
(SETUP
BUTTON)
Setting LANGUAGE (OSD MENU, SUBTITLE, AUDIO AND DVD MENU)
1 After entering the initial setting, move the DIRECTION buttons ( , , & ) to
select the Language.
2 Press the SELECT button to open language menu.
3 Move the DIRECTION buttons ( , , & ) again to select OSD MENU, then
press SELECT button to open submenu of OSD.
4 Select the language you want for your OSD using the UP & DOWN buttons ( , ), press
SELECT button to confirm.
5 Follow the above 3-4 steps to set the languages for subtitle, audio and DVD Menu.
6 To exit the language setting menu, press the UP button to return back to the initial
setting menu, or press SETUP button to close initial setting directly.
15
SELECT
BUTTON
LEFT
RIGHT
UP
DOWN
NOTE: OSD stands for ON SCREEN DISPLAY .
NOTE: Most people will not adjust the following functions and will go directly to Page 18 for basic play.
SELECT
BUTTON
LEFT
RIGHT
UP
DOWN
NOTE: The factory settings for LANGUAGE is English.
IB-DVD-2002-WC-ZR-E-V1