Filter
Top Products
DVD Player + TV + Dolby Digital System (Audio/Video Receiver)
1. Connect the audio cables to the AUDIO OUT L (left -white) and R (right-red) jacks on the back of your DVD Player,
and to the corresponding audio input jacks on your audio video receiver.
2. If you have a Dolby Digital or DTS receiver, insert a coaxial digital cable (not included) to the DIGITAL AUDIO OUT
jack on the DVD player and to the Digital Input jack on the back of the receiver. This connection will allow you to use
the Dolby Digital or DTS decoder functions of your AV amplifier (receiver). You must also set the Digital Output
setting in the Soundtrack menu (see page 17).
3. Connect the video cable.
Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD
Player, and to the Video Input jack on your TV.
OR
S-Video (optional) - If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack
on the back of your DVD player and to the S-Video jack on your TV. If your TV doesnt have S-Video, use the
basic video connection listed above (yellow plugs: VIDEO IN or OUT, are not needed for S-Video).
4. Insert the AC power cord into an AC outlet.
5. Go to Page 18 for playing DVDs (discs).
CONNECTIONS
7
4-,9016-
4-, 9016 -
IB-DVD-2002-WC-ZR-E-V1