Filter
Top Products
DVD Player + TV + VCR + Satellite Receiver
1. Connect the audio cables to the AUDIO OUT L (left -white) and R (right-red) jacks on the back of your DVD Player, and
to the corresponding AUDIO IN jacks on your TV.
2. Connect the video cable.
Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD
Player, and to the VIDEO IN jack on your TV.
OR
S-Video (optional) - If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on
the back of your DVD player and to the S-Video jack on your TV. If your TV doesnt have S-Video, use the basic
video connection listed above (yellow plugs: VIDEO IN or OUT, are not needed for S-Video).
3. Use an antenna cable to connect the antenna output on the satellite receiver to the antenna input on the VCR. This
DVD player does not change any antenna connections.
4. Insert the AC power cord into an AC outlet.
5. Go to Page 18 for playing DVDs (discs).
CONNECTIONS
8
This antenna connection is
the same as you have now.
I N FRONT ANT
!
"
IB-DVD-2002-WC-ZR-E-V1