Filter
Top Products
Operations in Detail Lexicon, Inc.
Editing, Continued
4-14
Figure 4-21 — Edit V-Page screen; programming faders.
The V-Page and Parameter Reassignment
• Press the EDIT key on the LARC2 control surface.
• Press the V-PAGE soft button. The screen (Figure
4-20) shows the assignments for each of the eight
faders and the joystick’s X and Y-axes.
• Use the Navigation Arrows to highlight the Type or
Parameter to change. (You can also select a fader or
joystick axis with the Numeric Keypad, but you still
have to navigate to the Type or Parameter.)
• Make your selection by cycling through the available
Types or Parameters with the +/– keys or touch the
fader of the desired parameter. The types are:
"None", "Algorithm", "Input", and "Output". Some
algorithms can have more than 50 parameters.
• The fader or joystick axis is now assigned to
whatever parameter you’ve selected.
Using the Edit Algorithm Screen
This alternate method is a useful shortcut: If you’re in
the midst of editing algorithms, inputs or outputs, it
enables you to quickly pick a parameter and assign it to
a fader or the joystick.
• Push the EDIT key, then the ALGORITHM soft
button, which brings up the Algorithm Edit
screen. This holds all the parameters for the
current algorithm, in up to ten "pages" of up to
eight parameters apiece. (The highlighted down-
arrow to the right of these pages shows that
there are more pages below the screen; these
pages can be reached by scrolling with the
Navigation Arrow keys – or, if you know the
number of the page you want, entering that
number on the Numeric Keypad.)
• Pick the parameter you need from this menu by
navigating to it , which will highlight it.
• Press the Options soft button. This changes the
soft buttons to "SELECT" (used for selecting
algorithms), "V-PAGE" (for assigning parameters
to faders), and "J-STICK" (for assigning
parameters to the joystick.), and the soft-button
background will change to yellow. See Figure
4-21.
Note: In Edit mode, the parameters and settings on
the Scribble Strip are not a V-Page. They are the
selected algorithm edit page, i.e., the row whose
number is highlighted, in larger characters for easier
reading.
On the Main Operating Display, parameters assigned
to the V-Page appear in blue; all others are in black.
From the Edit (Algorithm, Inputs, Outputs) Options
screen:
• Pressing the V-PAGE soft button pops up a
numbered list of the eight faders and their
assigned parameters (Figure 4-21). To assign
your newly selected parameter to a fader, type
the fader’s number on the Numeric Keypad, or
touch the desired fader.
Note: You must already have selected a
parameter before you get to this screen.