Lexicon 960L Flat Panel Television User Manual


 
Operations in Detail Lexicon, Inc.
4-18
Edit Tools for Registers
Pressing the EDIT soft button accesses three tools:
1) Copy Bank -- When 1 is pressed on the Numeric
Keypad, the contents of the currently selected
Program or Register Bank are copied to an internal
scratchpad.
2) Clear Register Bank – When 2 is pressed, the
contents of the currently selected Register Bank are
cleared. The Bank is made empty. For safety, the
user is prompted before the clear is executed.
Program Banks cannot be cleared.
3) Paste Register Bank – When 3 is pressed, the
contents of the scratchpad are copied to the
currently selected Register Bank. For safety, the
user is prompted before the copy is executed.
Program Banks cannot be pasted to.
Using the Floppy Drive
Pressing the FLOPPY soft button accesses four tools:
1) Load From Floppy – When 1 is pressed, the
contents of the floppy disk are loaded into Register
Banks 101-110. For safety, the user is prompted
before the load is executed.
2) Store to Floppy – When 2 is pressed, the contents
of Register Banks 101-110 are written to the floppy
disk. For safety, the user is prompted before the
load is executed.
3) Format Floppy – When 3 is pressed, the floppy is
formatted in IBM 2HD format. For safety, the user is
prompted before the format is executed.
4) Clear Floppy Banks – When 4 is pressed, Register
Banks 101-110 are cleared. For safety, the user is
prompted before the clear is executed.
The files written to the floppy disk can be read and
archived on any PC running Windows 95, 98, or NT.
The CD-ROM
Software updates will be made available on CD-ROM.
Instructions on how to load from CD-ROM will be
provided with each disk.
Machine Mode
If the 960L is configured as multiple machines, which
can be seen from the bottom line of the System Status
Display, pressing the MACHINE key on the LARC2’s
control surface will show you which Program or
Register each machine is running (Figure 4-26).
The currently selected machine will be highlighted in
the list in the Main Operating Display and in the System
Status Display. To switch to a different machine, enter
its number on the Numeric Keypad (or scan up or down
to it with the Numeric Arrow keys and press the ENTER
key).
The fader and joystick assignments on the V-Page will
then change to those for the machine you’ve selected.
Machine Shortcuts:
1) If you know the number of the machine you want to
access, simply press and hold the Machine key on
the LARC2 and enter the number – you needn’t
wait for the Machine Mode screen.
2) Hold down the MUTE MACHINE button and, on the
numeric keypad, press the number of the machine
you wish to mute or unmute.
3) Hold down PROGRAM or REGISTER and, on the
numeric keypad, press the number of the machine
you want, and you will be in PROGRAM or
REGISTER mode for that machine.
4) Hold down STORE and press the number of the
machine you want and you will be storing the edits
currently on that machine.
Figure 4-26 — Machine Mode