LG Electronics 32-3DCH-UA CRT Television User Manual


 
206-4071
PAGE 12
Installer Overview
Operating Installer Menu
To set up the controls for the TV you will need to know how to enter
the TV Installer menu and make changes to the default values. If
necessary, familiarize yourself with the TV Installer menu and how to
make and save changes to the items in the menu.
LG Installer Remote
You will need an LG Installer remote control similar to the one
shown to the right. The installer remote must have a “Source” but-
ton or its equivalent. The remote shown for reference in this manual
has “INPUT” -- this button serves the purpose of a Source button.
The TV’s clonable features need to be set up. This is a critical step.
If the Master TV display panel’s clonable features like added channel
icons or channel labels are not done correctly, then the cloned TVs
will all have problems. Refer to the TV menus for other TV features:
Picture, Audio, Option, Closed captions, Lock (V-Chip), etc.
TLL-1100A Clone Programmer
The TLL-1100A is a very simple cloner to use. It can
be set up to clone a master TV setup and transfer it
into a target TV. Cloning is possible using MPI proto-
col. Be sure the Master TV is set up completely.
Cloning is only possible when the signal source is an
An
alog channel, not a digital channel. Refer to TLL-
1100A instruction manual supplied with the cloner.
Typical Installer Menu
TV Link
Loader-Demo
TLL1100A
Ready
TLL1100A
ENTER
RECEIVE SEND
MENU
MODE
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND
INFO
SWAP
EZ PIC
TIMER
MUTE
CH
SAP
CC
RATIO
MENU
VCR
POWER
123
456
789
0
FLASH
BACK
PAG E
000 INSTALLER SEQ 000
UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00
HOSPITAL PTC INSTALLER MENU