Filter
Top Products
36
206-4096
Reference: Upgrading TV/PTC Software using a USB Memory Device
Checking the Software Versions
Note: This function is not accessible while the TV is
in FTG or PPV Mode.
You can check the software versions of the TV by
accessing the Installer Menu with the Installer
Remote: Press MENU repeatedly until the on-screen
setup menus lock up, and then, press 9-8-7-6 + OK
(Enter). When you are finished, press OK (Enter)
again to exit the Installer Menu.
HOSPITAL PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00
Typical Installer
Menu
CPU Version
PTC Version
Upgrading TV/PTC Software
Before you begin, note that the software upgrade fi les must be stored in a
folder named “LG_DTV” in the root directory of the USB memory device.
Also, ensure the USB device has been formatted with FAT format.
Note for TV Software Upgrade only: If the TV detects a later version of
software on the USB device, it will automatically display a dialog from which
you can start the software upgrade immediately. Otherwise, you can close
the dialog, and access the USB Download Menu as described below.
1. Turn the TV ON.
2.
Plug the USB memory device into the USB IN port on the TV.
3.
Press MENU on the Installer Remote to display the TV setup menus.
4. Use the arrow navigation keys to select/highlight either the Option (if
the TV is in Pass-through Mode) or Lock (if TV is in FTG or LodgeNet
PPV Mode) menu icon; then, press the number “7” key a total of seven
times to display the USB Download Menu.
5. Use the Up/Down arrow keys to select Upgrade TV Software or Up-
grade PTC Software, as applicable, and then press OK (Enter).
6. Use the Up/Down arrow keys to select the upgrade to install. Then,
press OK (Enter).
The TV will show update completion progress in a new window. Do NOT
remove the USB device until the software upgrade is complete. When a
TV software upgrade is complete, the TV will reset itself with an automatic
restart. When a PTC upgrade is complete, the TV will turn OFF.
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Exit Enter
epak : 3.19.0
model(EVENT) : 3.19.0
lgapp(EVENT) : 3.19.0
lgfont(EVENT) : 0.00.1
rootfs(EVENT) : 0.00.1
kernel(EVENT) : 0.00.1
lgres(EVENT) : 0.00.1
micom(EVENT) : 0.03.5
rootfs(EVENT) : 0.00.1
kernel(EVENT) : 0.00.1
lgres(EVENT) : 0.00.1
boot(EVENT) : 3.19.0
TV Software Update (Expert)
i
[ Current TV Software Version Information ]
epak : 3.15.0
model(EVENT) : 3.15.0
lgapp(EVENT) : 0.00.1
lgfont(EVENT) : 0.00.1
logo(EVENT) : 0.00.1
xxLG3DDH_v3_19_usb
Upgrade PTC Software
i
The following software files are found in the memory card.
PTC_xxLG3DDH_v1.01.004