Filter
Top Products
41
206-4096
Controller
Quick Check
STATUS
LED on PTC
Board
blinking?
Plug into AC
Power outlet.
TV
connected
to AC
Power?
Bad
TV
Yes
No
No
Yes
Cycle the power by
removing and reconnecting
the AC Power cord. Then,
observe POWER LED
on front of TV.
POWER
LED lit?
*
No
Yes
Press POWER on
Installer Remote.
TV
responded?
No
Yes
TV
responded?
No
Yes
End
Bad
TV
Bad
PPV Card
Press VOLUME UP/
DOWN or MUTE key on
User-supplied Remote.
Bad Analog or
Digital Board
TV
turned ON?
Yes
No
Press VOLUME UP/
DOWN or MUTE key
on Installer Remote.
Bad
TV
Troubleshooting (Cont.)
Troubleshooting Flow Chart
* LG3DDH TVs only: If Installer Menu item 027 HOSPITAL MODE is set to 254
(default), the POWER LED will not remain lit. Continue to the next step.