Filter
Top Products
13
Hookup and
Settings
Program Edit
You can edit a channel manually (add, delete, name,
move, etc.).
1. Select [Program Edit] option on the [Initial Setup]
menu.
2. Press ENTER.
The [Program Edit] menu appears.
3. Use v / V / b / B to select a PR number then
press ENTER.
4. CLEAR button: Deletes a program you do not
need.
v / V (up / down) buttons: Sorts the program
positions on the Program Edit menu. Press v / V
to move the selected program position to a new
location then press ENTER.
REC (z) button: Edits the program.
While channel number is highlighted, press
v / V to set the channel manually.
While channel station name is highlighted,
press ENTER to changes the station name. The
display for entering characters appears.
To enter characters, see page 39.
5. To exit [Program Edit] menu, press ENTER while
[OK] or [Cancel] is highlighted.
The Initial Setup Menu appears.
[OK] Exits with save the editing.
[Cancel] Exits without save the editing.
Manual Setting
You can perform a search to select and store TV
channels manually.
1. Select [Manual Setting] option on the [Initial Setup]
menu.
2. Press ENTER.
The [Manual Setting] menu appears.
[PR] Selects a PR number.
[CH] Selects the Channel number. Press AV to
select “S--” or “C--”. You can use number
buttons to select channel number.
[CH Fine Tune] Fine tunes the channel to obtain
a clearer picture.
[Manual Scan] Searches for a channel
automatically. Searching stops when the
recorder tunes in a channel.
[SECAM] Check for the SECAM channel setting
by pressing ENTER. Release the check mark for
PAL channel setting.
[Nicam] Check for the NICAM broadcast by
pressing ENTER. Normally, Check mark is
appears on the display. If the sound from NICAM
broadcast is not clear, press ENTER so check
mark disappears.
[Skip] If there is not check mark, current channel
is memorized. If you want to delete the channel
from memory, press ENTER so check mark
appears.
3. Enter the necessary information for date and time.
b / B (left/right) buttons: Changes the setting at
the current cursor position.
v / V (up/down) buttons: Moves the cursor to the
previous or next column.
ENTER button: Confirms the setting and returns to
the [Initial Setup] menu.
STOP button: Exits the menu.