Filter
Top Products
24
Playback
Playing a DVD, Video CD, or
Audio CD
Playback Setup
Turn the TV on and select the video input source
connected to the recorder.
Audio system: Turn the audio system on and select
the input source connected to the recorder.
1. Load your chosen disc in the tray, with the
playback side down.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
Use the b / B / v / V buttons to select the
title/chapter you want to view, then press ENTER to
start playback.
Press TITLE or MENU/LIST to return to the menu
screen.
Use the number buttons to select the track you want
to view.
Press RETURN (O) to return to the menu screen.
Menu setting and the exact operating procedures
for using the menu may differ depending on the
disc. Follow the instructions on the each menu
screen. You may also set PBC to OFF on the On-
Screen Display. See page 24.
2. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. “Xx” appears on the screen briefly.
Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes
automatically and unit turns off.
Notes:
If Parental Control is set and the disc is not within
the Rating settings (not authorized), the 4-digit
code must be entered and/or the disc must be
authorized (see “Parental”, on page 18).
DVDs may have a Region Code.
Your recorder will not play discs that have a region
code different from your recorder. The region code
for this recorder is 2 (two).
To view TV channel or video input source during
Audio CD playback, press STOP (x).
Unless stated otherwise, all operations described
use the remote control. Some features may also be
available on the Setup menu.
On and off the PBC function
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
1. Press DISPLAY and press b / B to select the PBC
icon.
2. Press v / V to set the PBC mode to [On] or [Off].
[On] Video CDs are played according to the PBC,
if available.
[Off] Video CDs are played the same way as Audio
CDs.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
1. Press DISPLAY during playback then use b / B to
select the title icon then press ENTER.
2. Press the appropriate numbered button (0-9) or
v / V to select a title number.
Tip:
You can also select title in stop mode. Press DISPLAY
twice and title icon appears. Use number button to
select a title number then press ENTER. The title’s
playback starts.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
Press SKIP . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/chapter during
playback, press DISPLAY and press b / B to select
the chapter/track icon. Then, input the chapter/track
number or use v / V.
DVD+R+RW
VCD
VCD
DVD