Filter
Top Products
19
Connect the Recorder to the TV
To connect the Recorder to the TV, you can use S-Video, Composite, or
Component cables.
You may need to change the TV video source to use the Recorder. On
your TV remote control or the front panel of your TV, press TV/VIDEO
until you see the Recorder Welcome screen. The TV/VIDEO button
might be marked SOURCE, INPUT, VIDEO 1, or VIDEO 2.
Important Connecting the Recorder to a TV by using an RF/coaxial
cable is not supported.
Note Labels for connections on TVs vary by brand. If you cannot nd
a connection as specied in the following instructions, refer to the TV
documentation.
Use Composite Cables
AV IN
TV
Recorder
1. On the Recorder, connect the composite video cable (yellow) to
VIDEO OUT. Connect the composite audio cables (red and white)
to AUDIO OUT.
2. On the TV, connect the composite cable to the composite In
connections (for example, AV IN, TV IN).
Use S-Video Cables
AV IN
TV
Recorder
S-Video
1. On the Recorder, connect the S-Video cable (not included) to the
S-VIDEO OUT connection.
2. On the TV, connect the S-Video cable to the S-Video in connection.