Filter
Top Products
22
Connect the IR control cable
Digital Cable Set-Top Box/
Satellite Receiver
Recorder
Front
1. On the Recorder, connect the mini-jack of the IR control cable to the
IR port.
2. On the IR control cable, attach the adhesive tape (included) to the
at surface just below of the blaster on the IR control cable.
3. On the digital cable set-top box or satellite set-top box, locate the
remote control receiver/sensor.
The remote control receiver/sensor is usually behind a small window
on the front panel of the set-top box. If you cannot locate the
receiver, shine a ashlight along the front of the set-top box. Refer
to the set-top box documentation or contact your cable service or
satellite service provider for more information.
4. Place the IR control cable blaster in front of the remote control
sensor and press the top of the blaster (with the adhesive tape) to
the surface below the set-top box.
OR
Connect the serial data control cable
Satellite Receiver
Recorder
1. On the satellite set-top box, connect the serial data cable to the
9-pin serial port.
2. On the Recorder, connect the mini-jack to the SERIAL port.